Loading
Loading
We engineer, fabricate and install monument signs for owners, architects and general contractors across Minneapolis–St. Paul: illuminated cabinets, masonry-base programs, faux-Corten and cedar-timber monuments. Footing details, permit drawings, UL-listed lighting and paint all happen in our Vadnais Heights shop. The people who draw your monument are the people who build it.
Fabricated aluminum cabinets lit from inside, with push-through acrylic copy or day/night faces that read gray in daylight and glow white after dark. Built and UL-labeled in our shop.
Your cabinet or letters on a stone or brick base laid by your mason. We embed the mounting brackets before the masonry is finished, then return to hang the sign.
The weathered-steel look, two ways: our proprietary five-coat faux-Corten paint on aluminum, which never bleeds rust onto concrete or turf, or real ¼-inch weathering steel with a living patina.
Rough-cut cedar posts and headers joined to engineered steel knife plates, through-bolted with galvanized hardware and isolated from the aluminum so dissimilar metals never touch.
Painted flat-cut aluminum, brushed stainless or halo-lit channel letters on a panel, cabinet or masonry face. Flat-cut letters are stud-mounted; lit letters carry the UL label.
A damaged or dated monument may not need new footings. We've built replacements that drop onto surviving anchors and reskinned campus monuments in place, keeping the masonry.


A semi-trailer destroyed Dakota County's greenway monument. We built a double-faced faux-Corten aluminum replacement, field-templated to the surviving footings, and the county's crew set it on the original anchors in one morning.
Read the case study →Twin Cities metro — multiple sitesNine monuments across eight Twin Cities suburbs since 2016, all through GC Weis Builders, each permitted in its own city. The latest became a double-sided illuminated cabinet with day/night faces.
Read the case study →Pine City, MNAn owner-direct design-build contract: a 15-foot cedar-timber entrance monument with halo-lit letters, its steel knife plates revised four times until the architect and structural engineer approved them, then a matching illuminated secondary monument.
Read the case study →Victoria, MNWon on the watershed district's direct RFQ: an illuminated entry monument in ¼-inch weathering steel, its waterjet-cut oak canopy glowing through a translucent panel, with a piano-hinged face for service.
Read the case study →For sign shopsSign companies buy this same work from us wholesale — blind-shipped, white-labeled, and the accounts you bring us stay yours.
Wholesale manufacturingYes. Minneapolis requires a sign permit for permanent signs, and only a City-approved sign contractor can apply. St. Paul requires a permit for every business sign, filed through its PAULIE system. Suburbs write their own codes, and the zoning district sets the size and lighting you can have. We draw the permit set and file it with the job; our Applewood Pointe monuments cleared eight different city codes. Our city sign-permit guides, under Resources, cover the details.
We do, as part of the job. Engineering review is included in every quote, and the drawings carry footing details and wind-load calculations, stamped where the city requires it. When another contractor pours the concrete, we send anchor templates so the pour fits the sign. On Pine Tech's cedar monument the structural engineer sent our first base-plate detail back; four revisions later the architect and engineer of record approved it, and we built it exactly as reviewed.
Yes. It is how we built nine Applewood Pointe monuments across the Twin Cities. The stone piers don't exist yet when fabrication starts, so we embed the mounting brackets before the mason finishes, then come back to hang the cabinet and letters. Two trips, sequenced to the mason's schedule, with the sign painted to the brand standard every time.
Options include LED lighting inside a fabricated aluminum cabinet behind push-through acrylic copy, day/night faces that read gray in daylight and glow white after dark, or halo-lit letters that wash light onto the face behind them. Every electric sign we build is wired and labeled to UL 48 in our shop. Plan for an electrician to run a dedicated circuit to the sign location before the monument is set.
Not always. When a semi-trailer destroyed Dakota County's Lone Oak Trailhead monument, the footings survived; we field-templated them and built a replacement that dropped onto the original anchors, set by the county's crew in one morning. At Hennepin Technical College we kept two campus monuments' masonry and gave them new painted-aluminum faces and dimensional letters. Footings, anchors and masonry can be worth keeping.
Plan on two numbers. Fabrication in our Vadnais Heights shop typically runs 3 to 4 weeks once drawings are approved and the permit is in hand. Concept to installation for most commercial monuments runs 8 to 14 weeks, because design, engineering, permitting and the foundation come first, and permit review alone ranges from about 2 to 6 weeks depending on the city. Start early and we sequence drawings and permits so shop time is never the bottleneck.
The monument sign process from design to installation: materials, engineering, permitting, fabrication, foundations, and electrical.
Corten (weathering) steel signage guide: how the patina develops, design considerations, maintenance, and the best applications.
How Minneapolis sign permits work under the post-2040 zoning code: districts, the application process, common rejection reasons, and variances.