Loading
Loading
Flat-cut and fabricated metal letters for building faces, monuments, lobbies and corridors across Minneapolis–St. Paul. We cut them from aluminum plate on our waterjet or CNC router, build deeper letters in our metal shop, paint them in our own booth and stud-mount them on a drilled pattern so every letter lands level. One shop in Vadnais Heights draws, cuts, finishes and installs.
Cut from solid plate on our 55,000-PSI waterjet or CNC router, so the plate is the depth. Recent letter jobs ran ¼-inch and ½-inch aluminum, from 10-inch letters to a near-ten-foot city logo.
Built up from a face and welded returns in our metal shop, for more depth than solid plate gives. Same shop as our UL-listed channel letters, with nothing lit inside.
Bigger than our 5' × 10' waterjet bed? We section it. Seams are planned on the shop drawing and the pieces reassemble on a full-size pattern, so the logo reads as one piece on the wall.
Painted to your color in our in-house booth, brushed under a clear coat, or finished in our five-coat faux-Corten paint system: the weathered-steel look on aluminum, with no rust runoff.


A near-ten-foot city logo waterjet-cut in sections from half-inch 5052 aluminum, reassembled on a full-size drilled pattern and stud-mounted to the brick, with matching station lettering and 12-inch address numbers.
Read the case study →Pine City, MNA 42-inch by 12½-foot building letter composition in ¼-inch painted aluminum, stud-mounted on pattern — part of an owner-direct design-build contract with the Minnesota State system.
Read the case study →White Bear Lake, MNA 36-inch flat-cut aluminum district logo, blind-stud mounted in multiple pieces, plus MUSIC, GYM and A LA CARTE lettersets — the gym set re-patterned to run vertically when the wall said no.
Read the case study →St. Paul, MNA 12'-4" canopy letterset in half-inch flat-cut 5052 aluminum for a new affordable apartment community, set through a coordinated union install under GC Weis Builders.
Read the case study →For sign shopsSign companies buy this same work from us wholesale — blind-shipped, white-labeled, and the accounts you bring us stay yours.
Wholesale manufacturingFlat-cut letters are cut from solid plate on our waterjet or CNC router, so the plate thickness is the letter's depth — ¼ inch or ½ inch on our recent jobs. Fabricated letters are built up in our metal shop from a face and welded returns, for more depth than solid plate gives. Neither is lit from inside. If the letters need to glow, that's a channel letter, and we build those in the same Twin Cities shop.
We stud-mount letters on a full-size drill pattern instead of measuring holes one at a time on a ladder. The pattern fixes spacing and baseline before anyone drills, and the studs are set in silicone. At St. Croix Central it kept the identity letters dead level on a school corridor. On the Division Headquarters world map, full-size templates transferred hundreds of mounting points to the wall before any aluminum went up.
A single piece can be as large as our 5-by-10-foot waterjet bed. Past that, we section it. For Burnsville Fire Station #1 we drew sectioning studies for a 9'-11¾" by 7'-4¾" city logo in half-inch aluminum, cut it in pieces, and reassembled it on a full-size pattern so it reads seamless on the brick. The seams are decided on the drawing, not found on the wall.
Almost always. Minneapolis requires a sign permit for nearly all exterior signs; the exemptions are narrow, mostly very small signs under roughly eight square feet. What unlit letters skip is the separate electrical permit and electrical inspection an illuminated sign needs. If the building sits in a Heritage Preservation District, the design and materials go through HPC review before the permit is issued. Our Minneapolis permit guide walks through the process.
Yes, and it doesn't have to mean a teardown. When Hennepin Technical College renamed a building, we reskinned its existing monument in place and set new 10-inch painted-aluminum letters naming the Public Safety & Police Science Center, toned to match the building. When the Guard's Division Headquarters in Arden Hills was renamed for Gen. John W. Vessey Jr., we set the new letters there too.
Paint is the workhorse: sprayed in our in-house booth and color matched to the spec. Bare-metal looks come brushed, with a #4 grain under clear coat, or clear-anodized, like the early-learning-center letters at St. Croix Central. For the weathered-steel look, our five-coat faux-Corten paint system puts it on aluminum, with none of the rust runoff real Corten leaves on concrete and pavers.
Channel letters vs dimensional letters: construction differences, cost factors, illumination options, and when to use each sign type.
Waterjet vs laser vs plasma cutting for sign fabrication: when to use each by material, thickness, precision, and budget.
How Minneapolis sign permits work under the post-2040 zoning code: districts, the application process, common rejection reasons, and variances.