Loading
Loading
Channel letters put your name on the building, so they have to read after dark and pass inspection the first time. We build them start to finish in Vadnais Heights, 20 minutes from either downtown: fabricated aluminum, LED illumination, power supplies and the UL label, under one roof. Face-lit, halo-lit or open-face neon, for owners, general contractors and architects across Minneapolis–St. Paul.
Light passes through a translucent acrylic face, held by trim cap or built trimless. The choice when the name has to carry after dark. The Wilford reads this way over both entrances.
Solid faces, with LEDs washing the wall behind each letter. A halo is brightest at the letter and softens as it spreads: atmosphere more than distance. Pine Tech's cedar entrance monument glows this way.
No face hiding the light source. The glow is the look. Vista 44's letters seat red LED neon in a CNC-routed acrylic backer behind clear faces, every neon run cut and sealed in our shop.
Channel construction isn't only for type. Logomarks get the same lit build: Pine Tech's 36-inch halo-lit three-pines roundels, and the face-lit LED leaf on both faces of Applewood Pointe's Apple Valley monument.


Twelve-inch open-face channel letters with exposed red LED neon. When only three of eleven pre-cut neon runs fit, we cut, capped and waterproofed every run in-house, then burned the set in.
Read the case study →Waconia, MNA mid-project rebrand delivered by change order: face-lit trimless channel letters over an illuminated light box at both entrances, and a halo-lit W blade sign on the street corner.
Read the case study →Pine City, MNAn owner-direct design-build entrance monument: halo-lit fabricated channel letters and 36-inch halo-lit three-pines roundels on a cedar-timber structure, its steel connections engineered through architect and structural review.
Read the case study →For sign shopsSign companies buy this same work from us wholesale — blind-shipped, white-labeled, and the accounts you bring us stay yours.
Wholesale manufacturingJudge it from the street at night. Face-lit letters push light through the face, so the name carries at distance. A halo is brightest at the letter and fades as it spreads, and an unlit face can disappear at an angle on a dark street. At The Wilford in Waconia we mocked both onto the architect's renderings overnight. The owner chose face-lit letters over the entrances and saved the halo for the corner blade sign.
Yes. Open-face letters show the light source itself. For Vista 44 in Hopkins we built 12-inch letters with red LED neon seated in a CNC-routed acrylic backer, behind clear faces that keep bugs and weather out of the glow. When the supplier's pre-cut neon didn't fit, we cut, capped and waterproofed every run on our own bench. Cutting exposed neon in-house has been part of our process ever since.
Plan for it at electrical rough-in, not after the walls close. A typical LED channel letter set runs on one dedicated 20-amp, 120-volt circuit, with a remote power supply in an accessible location. The NEC also requires a disconnect within sight of the sign, or a lockable one at the panel, and inspectors check it. Route our submittal to your electrical sub: it carries power supply locations and circuit requirements.
Proof the sign is listed. In Minneapolis, an illuminated sign needs a separate electrical permit application and UL listing documentation alongside the sign permit, then both a sign inspection and an electrical inspection after install. Every illuminated sign we build carries a UL label and uses UL-recognized components, and UL documentation ships with every order, so the paperwork is ready when the inspector asks.
Yes. Channel letters and logos mount to monuments as well as walls. Pine Tech's 15-foot cedar-timber entrance monument carries halo-lit fabricated channel letters and 36-inch halo-lit three-pines roundels, with its galvanized hardware isolated from the aluminum by plastic washers so dissimilar metals never touch. On Applewood Pointe's Apple Valley monument, the brand's leaf is a face-lit LED channel element on both faces.
Yes. We install across the Twin Cities, but a set can also be engineered to go up without us. On Vista 44, Shaw-Lundquist bought materials only, so every piece shipped with the patterns, templates, wire whips and instructions the GC's crews needed to set it themselves. The canopy mounting was engineered to protect the roof warranty, a risk we flagged in our first bid.
Channel letters vs dimensional letters: construction differences, cost factors, illumination options, and when to use each sign type.
What UL listing means for electrical signs, why it's legally required, how inspection works, and how to verify your manufacturer is listed.
How Minneapolis sign permits work under the post-2040 zoning code: districts, the application process, common rejection reasons, and variances.