Loading
Loading
We manufacture ADA room signs, braille signs and interior and exterior wayfinding in Vadnais Heights for projects across Minneapolis–St. Paul. Every ADA sign gets Grade 2 braille from automated equipment, and every specification is checked against the ADA Standards and the Minnesota State Building Code before fabrication starts. The same shop builds the door signs, the directionals and the post-and-panel signs out front, so the whole family matches.
Room names and numbers in raised uppercase sans-serif, Grade 2 braille below, on a non-glare face. Insert windows where names will change.
Braille unit IDs for every apartment door. Restroom signs sized to code, even when the drawings show them smaller. We flag it at bid.
Stairwell floor-level signs, tactile level indicators for every stair tower, and tactile EXIT signs at egress doors. Missing braille here fails inspection.
Area-of-refuge communication signs at elevator landings, evacuation maps, and storm-shelter signage for tornado safe rooms.
Tactile and printed directionals, unit-range signs, framed directories and You-Are-Here maps. Built in the same family as the door signs.
Post-and-panel directionals in painted aluminum with retroreflective copy for night reading, set on footings augered three to four feet for frost.


150+ ADA interior signs for a new affordable apartment community: 76 braille unit IDs, room IDs, stair egress panels, tactile level indicators, and area-of-refuge signage at every elevator landing.
Read the case study →White Bear Lake, MN1,400+ sign faces across eight phased turnovers: thermoformed ADA room ID with Grade 2 braille at nearly every door, plus 42 framed directories and You-Are-Here maps added by change order.
Read the case study →Brooklyn Park, MNOwner-direct exterior wayfinding: ten post-and-panel directionals standardized into one family, retroreflective copy for night reading, set on roughly twenty augered footings three to four feet deep for frost.
Read the case study →Burnsville, MN88 three-layer thermoformed ADA signs in department colors, raised text and Grade 2 braille, with the city logo on public rooms and the fire-department eagle on crew rooms.
Read the case study →For sign shopsSign companies buy this same work from us wholesale — blind-shipped, white-labeled, and the accounts you bring us stay yours.
Wholesale manufacturingPermanent room identification does: room names and numbers, restrooms, tactile exit signs at egress doors, and stairwell floor-level signs. All of them need raised characters with Grade 2 braille below. Directional and informational signs, directories, temporary signs, addresses and branding logos don't. Directionals still need visual accessibility, meaning high contrast and a legible character size. Send us the plans and we'll confirm which signs need what before anything is fabricated.
It can. The ADA Standards for Accessible Design set the federal baseline, and Minnesota also enforces the Minnesota State Building Code, which references ICC/ANSI A117.1 and can impose requirements beyond it. We verify every sign specification against both before fabrication begins. We check the drawings, too: at Central Middle School in White Bear Lake, the drawn restroom signs were smaller than ADA allows. We flagged it in our estimate, and they were upsized.
Grade 2 is contracted braille. It uses contractions and shorthand instead of spelling out each letter, and it's the grade the ADA requires. Grade 1 on a room sign is one of the failures we see most at inspection. Every ADA sign we build gets automated braille: domed dots placed to within 0.002 inch, and every sign checked against its source translation file before it ships. Hand templates can't hold that across a long run.
On the latch side of the door, with the baseline of the tactile characters between 48 and 60 inches above the finished floor. Hinge-side signs and signs outside that band are two of the most common inspection failures we see across the Twin Cities. Double doors and alcoved entries are where it gets confusing: when the latch side has no wall, the sign goes on the nearest adjacent wall. Our shop drawings include the mounting details.
Tactile signs can't be edited once they're made, because the raised copy and braille are part of the sign. So we track the owner's room schedule sign by sign right up to release, and on phased projects we fabricate phase by phase against the construction calendar. Where a name is likely to change, we build an insert window so the name can be swapped without remaking the sign.
Hennepin Technical College's ten-sign directional family in Brooklyn Park is a good example: aluminum channel-body panels on square-tube aluminum posts, cut, welded and painted in our own shop, with retroreflective vinyl copy so the signs read at night. Every post leg is set in concrete, in holes augered three to four feet deep for frost, and the Gopher State One Call locates are pulled before anyone digs.
Minnesota ADA signage requirements explained: tactile characters, Braille, mounting heights, contrast, and the mistakes that fail inspection.
Automated vs manual Braille application for ADA signs: consistency, speed, cost per sign, error rates, and compliance verification.
How school districts and GCs keep ADA signage, wayfinding, and code signs on schedule through multi-phase renovations — lessons from 1,800+ signs across two live schools.