Loading
Loading
Lobby signs and interior logos for offices, campuses and public buildings across Minneapolis–St. Paul: halo-lit and push-through logos, flat-cut metal letters, feature walls and directories. We cut, finish and wire them in our Vadnais Heights shop, UL-labeled where they light up and brand color matched in our own paint booth, then set them on your wall. The people who engineer the sign are the people who build it.
Fabricated letters or a logo cabinet lit from behind, so white LED light washes the wall and the mark reads as a silhouette. A halo is brightest at the letter and fades as it spreads. Any unevenness shows, so we tune the glow, not just the letters.
Half-inch acrylic graphics pushed through a cut aluminum face and lit from inside the cabinet. The logo glows; the face stays solid. Add a halo and the wall glows too. That is the build on our lobby logo at 901 Marquette.
Quarter-inch aluminum, waterjet-cut or CNC-routed, painted in our booth or brushed and clear-coated. Stud-mounted off the wall on a drilled pattern, so the logo casts its own shadow. Large marks are sectioned and set in pieces.
Room and space names in flat-cut aluminum or acrylic: AUDITORIUM, ASSEMBLY HALL, MUSIC, GYM. Laid out to the wall that is actually there, and re-patterned when the wall says no.
Large-format dimensional art for an atrium or reception wall. Waterjet-cut aluminum, engineered into pieces that fit through the door, and laid out on the wall with full-size templates, with blocking coordinated behind the wall during framing.
Framed directories and You-Are-Here maps, suite and room identification, and cast aluminum or bronze dedication plaques, specified and delivered as one family with the logo.


A 48-by-48-inch illuminated lobby logo at 901 Marquette: half-inch push-through acrylic in an aluminum cabinet, brand blue paint-matched from a hex code, and a halo evened out with a bench-prototyped diffusing lens.
Read the case study →Arden Hills, MNA 16-by-40-foot world map in quarter-inch waterjet-cut aluminum, seams hidden in geopolitical borders, set two stories up the atrium wall off full-size templates. Plus Assembly Hall and Auditorium letters.
Read the case study →White Bear Lake, MNA 36-inch flat-cut aluminum district logo, blind-stud mounted in multiple pieces, plus MUSIC, GYM and A LA CARTE lettersets. The gym set was re-patterned to run vertically when the wall said no.
Read the case study →For sign shopsSign companies buy this same work from us wholesale — blind-shipped, white-labeled, and the accounts you bring us stay yours.
Wholesale manufacturingPush-through puts the light in the graphics: half-inch acrylic set through a cut aluminum face and lit from inside the cabinet, so the logo itself glows. Halo-lit puts the light behind the letters or cabinet, washing the wall so the mark reads as a silhouette. A halo is brightest at the letter and fades as it spreads, and any unevenness shows. The two combine well. Our lobby logo at 901 Marquette in Minneapolis uses push-through graphics with a halo behind them.
On evidence, not guesswork. Send us the architect's wall elevation, or a photo of the wall with its dimensions, and we will draw the logo on it at more than one size. For Hays Financial Group we ran three scale studies against the elevation before anything was cut, and the client picked from those. A logo that looks right on a screen can look lost on a big wall or crowded on a small one.
Yes, but not by trusting a screen. A hex code is a screen color: it doesn't translate directly to paint, and every monitor shows it a little differently. We match the color through our paint system and spray it in our own booth, rather than eyeballing a display. That is how Hays Financial Group's exact brand blue landed on its lobby logo. Pantone and paint codes get the same treatment.
In pieces, engineered so the seams disappear. At the Division Headquarters in Arden Hills, a 16-by-40-foot aluminum world map was cut so every seam fell on a border and every piece fit through the front door. We CNC-cut full-size cardboard templates to transfer the mounting points, then set the aluminum from a scissor lift. Smaller marks follow the same logic: the 36-inch Central Middle School logo went up in multiple pieces on blind studs.
Three things, best settled while the wall is still being framed. Blocking behind it for anything heavy; at the Division Headquarters that was coordinated during framing. Mechanical mounting on fresh paint: low-VOC paints cure slowly, so we stud-mount rather than trust tape on a new wall. And for a lit sign, power at the location and an electrician sequenced to the install. Tell us early and it all goes on the shop drawings.
We fix it on the wall. At Hays Financial Group the halo read hotter in the corners than we wanted after install. We prototyped rear diffusing lenses on our bench, tested them against the installed sign in a fifteen-minute site visit, and fitted the finished lens on the next trip. The cabinet never came off the wall. Building in the Twin Cities, twenty minutes from either downtown, is what keeps that kind of follow-through quick.
Every news story, map, and delivery app pictures your company the same way: your sign. Why signage is your permanent press photo — and the ten-second audit.
Channel letters vs dimensional letters: construction differences, cost factors, illumination options, and when to use each sign type.
What UL listing means for electrical signs, why it's legally required, how inspection works, and how to verify your manufacturer is listed.