Search "sign company Minneapolis" and you get lists of names. A list can't tell you which company fits your building. These nine questions can. They're written for building owners, property managers and facility directors.
The short version: find out who builds the sign, whether the lit pieces carry a UL label, who pulls the permit, who installs and wires it, and where you can see the work in person. A good sign company answers all nine plainly. Get the answers in writing, with the proposal.
1. Who actually builds the sign?
A sign company can design, sell, permit and install a sign without fabricating it. Many good sign companies buy some or all of their fabrication from wholesale manufacturers. That's a normal, healthy way to run a sign business: the company you hire keeps the design, the relationship with you and the install, and the manufacturer builds to its drawings.
Dimension Sign is one of those wholesale manufacturers, building for more than 200 trade partners, so we see the model from the inside. It works when everyone knows who does what.
So the question isn't whether a company builds in-house. It's whether they'll tell you who does. The builder decides the materials, the finish, the wiring and whose UL label goes on the sign. Ask:
- Where will my sign be fabricated, and by whom?
- Can I see the shop, or samples of the finish and construction?
- If something is built wrong, who fixes it?
2. Are the illuminated signs UL-listed, and whose label is on them?
A lit sign wired to your building falls under UL 48, the safety standard for electric signs. NEC Article 600 requires electric signs to be listed by a nationally recognized testing laboratory unless the local authority approves a field-assembled sign. Inspectors check for the label at installation, and a sign without one can be rejected and pulled.
The listing belongs to the manufacturer that builds the sign, not the company that sells it. A sign company without its own listing can still sell UL-labeled signs, as long as its builder is listed. That's why the useful question is whose label goes on your sign.
To check, ask for the builder's UL file number with the quote and search it on UL Product iQ, UL's online directory, where electric sign manufacturers list under category QJCR. The label shows the UL mark, the manufacturer's name, the file number and the electrical ratings.
Unlit signs, like flat-cut letters and ADA room signs, have no electrical parts for a label to cover. See what the UL label covers and why UL listing matters.
3. Who pulls the permit?
Assume your sign needs one. Minneapolis requires a permit for nearly every permanent sign, and only a City-approved sign contractor can apply. Saint Paul requires every business sign to go up under a permit, filed through the city's PAULIE system with the Department of Safety & Inspections. Suburbs write their own codes.
The zoning district sets the size, type and lighting you can have. In Minneapolis, every sign already on the property counts against the allowance, including other tenants' signs. A lit sign there also needs a separate electrical permit, then a sign inspection and an electrical inspection after install. Tenants should plan on a landlord authorization letter.
Ask who draws the permit set, who files it, and whether permitting is in their scope or left to you. Start with the city guides for Minneapolis and St. Paul, or the longer Minneapolis sign permit guide.
4. Will I approve shop drawings before anything is built?
You should. Shop drawings show dimensions, materials, colors, lighting and mounting. Minneapolis asks for the same detail in a permit application, so good drawings do double duty. Before you approve, check three things:
- Scale. See the sign drawn at size on your building elevation or a photo, so you pick the size on evidence.
- Color. Hex codes don't translate directly to paint, and screens lie about color. Ask for a physical sample of your brand color.
- Light. Face-lit letters push light through the face, so the name carries at a distance. A halo is brightest at the letter and fades as it spreads. Judge both from the street at night.
Approve carefully. Signs are special-order: once a drawing is released to fabrication, a change is a remake, not an edit.
5. Who installs it, and who connects the power?
Ask whether the install crew is the company's own or a subcontractor. Either can work, as long as one party answers for the result. In a downtown or occupied building, ask who handles dock schedules, security lists and insurance certificates.
The LEDs, power supplies and wiring inside a lit sign are the builder's work, under the label. The connection to building power is separate, and in Minneapolis it carries its own electrical permit. Bring your electrician in at rough-in: a typical LED channel letter set runs on one dedicated 20-amp, 120-volt circuit, and the NEC requires a disconnect within sight of the sign or a lockable one at the panel.
Freestanding signs add footings. In Minneapolis, the application needs structural engineering stamped by a Minnesota-licensed engineer. Someone has to call Gopher State One Call for utility locates before digging. If another contractor pours the concrete, ask for anchor templates so the pour fits the sign. More on monument signs.
6. Can I see real work near here, and how did each job come in?
Photos are a start. Addresses are better. Ask for a few local jobs you can go and see. Visit the lit ones after dark, and find one that's a few years old to see how it has held up.
Then ask how each job came in: direct from the owner, through a general contractor, or built for another sign company. All three are honest work, and they prove different things. A sign company that buys its fabrication can rightly show work it designed, sold and installed. Just ask which part it did.
Our own portfolio labels every case study Owner Direct, General Contractor or Wholesale Partner for exactly this reason.
7. What is it made of, and how is it attached?
Two signs can match on the drawing and age differently. Ask what each piece is made of, how thick it is and what finish goes on it. Then ask how it attaches:
- Letters. Will dimensional letters be stud-mounted, set into holes drilled from a full-size pattern, or held on with tape?
- Fresh paint. Low-VOC paints cure slowly, so a wall keeps releasing solvents for months after it looks dry, and taped signs can let go. Ask for mechanical fasteners on any wall painted the same season.
- Mixed metals. Where steel hardware meets aluminum, ask how they keep the dissimilar metals apart.
- The rust look. Real weathering steel bleeds rust onto the concrete below it. Ask whether it's real steel or a finish.
8. Has anyone checked the plan against code?
Architects' sign schedules are usually right, but "usually" fails inspections. Ask whether the sign company checks the drawings against the ADA and ICC A117.1 before it bids. Permanent room signs need tactile characters 5/8 inch to 2 inches tall, with Grade 2 braille directly below. The accessibility pictogram needs its own 6"×6" field, which pushes a compliant restroom sign to at least 6"×8". See ADA signs and the Minnesota ADA signage requirements.
Outside, the same check runs against the city sign code: allowance, height, lighting and any overlay district. In Minneapolis, signs in Heritage Preservation Districts also need Heritage Preservation Commission review. Catching a problem on paper beats re-fabricating a sign during punch.
9. Who takes care of it after it's up?
Signs need service. Faces crack, letters go dark and tenants move. Ask who you call when that happens: the company that sold it, the one that built it, or both. If those differ, ask how a warranty claim reaches the builder.
Ask whether a technician can reach the power supplies without pulling the sign. Where rooms change, ask about insert-window signs: the frame stays and the name swaps. And ask the company to keep your drawings and color specs on file, so a replacement face or a second location matches the first.
Quick checklist
| Question | A good answer sounds like |
|---|---|
| Who builds the sign? | A named shop you can visit, or samples you can hold |
| Is the lit work UL-listed? | The builder's UL file number, with the quote |
| Who pulls the permit? | A named party who draws and files it |
| Will I approve drawings? | Scaled drawings and a physical color sample |
| Who installs and wires it? | One accountable party, with a clear handoff to your electrician |
| Can I see local work? | Addresses you can visit, and how each job came in |
| What is it made of? | Materials, finish and attachment, in writing |
| Has anyone checked code? | ADA and sign-code review before fabrication |
| Who services it? | A name to call, and your drawings on file |
Where Dimension Sign fits
Dimension Sign is the wholesale manufacturer you can also hire direct. We build in-house in Vadnais Heights on CNC routers, a 55,000-PSI waterjet, CO2 laser and CNC plasma, with our own welding and paint booth, and every illuminated sign we build carries our UL label. We can draw and file the permit with the job, and we install across the Twin Cities. If a sign company already brought your project to us, we keep working through them: the accounts a sign shop brings us stay theirs.
See the work for yourself, from Hays Financial Group's lobby logo in downtown Minneapolis to The Lofts on Rose in St. Paul and Hennepin Technical College in Brooklyn Park. Read about our work in Minneapolis, St. Paul and the Twin Cities, or send us your project. A person replies within one business day.