A fire station or a water treatment plant is not signed like an office building. A fire station has a public lobby, crew quarters, an apparatus bay and a ribbon cutting on a fixed date. A treatment plant is chlorine rooms, pump rooms and filter rooms across several levels, where the room sign is a safety requirement as much as a code one.
This guide covers what the sign package includes for each, and how to get it through the architect's or engineer's review the first time. It's built on two of our projects: Burnsville Fire Station #1 in Minnesota and the Brandon Water Treatment Plant expansion in South Dakota. Since Burnsville, we've built or bid stations for cities including Shakopee, Edina, Otsego and Oak Grove.
Start with Section 10 14 00
On public work, the signage scope lives in the project manual, usually Section 10 14 00, Signage. It lists the sign types, the materials, the approved manufacturers and what each submittal must contain. Read the addenda, too: the Brandon spec from the engineer, AE2S, had six.
At Burnsville, CNH Architects' Section 10 14 00 named approved manufacturers for each of eight product categories, from dimensional letters and room signs to parking signs, window films and the cast plaque. Our shop was named in all eight, beside the national brands. General contractor Welsh Construction awarded us the whole bid pack. One subcontract for every sign discipline means one submittal set, one schedule and one point of contact.
What a fire station needs
Exterior identification
The station name, the department name and the city or department logo, usually in dimensional letters on the masonry. Burnsville carries vertical BURNSVILLE FIRE letters, the station name, and a near-ten-foot city logo on the apparatus-bay brick.
What goes wrong: a logo that size is too big to cut, finish or ship in one piece, and the spec asked for it to read as seamless. We drew formal sectioning studies, waterjet-cut the logo in sections from half-inch aluminum, and reassembled it on a full-size drilled pattern with stainless studs. More on that method at dimensional letters.
Address numbers and a site monument
Address numbers are a fire-code item: they have to be visible from the street, and the required size varies by jurisdiction. Burnsville's are 12 inches tall. The city added a masonry monument mid-project by proposal request. It came with its own permit and its own submittal cycle, so budget time for both if a monument might be added late. See monument signs.
ADA room signs, with two audiences
A station has public rooms and crew rooms. Burnsville's ADA family used both logos: the city's logo on public rooms, and the fire department's eagle on crew rooms. Insert windows went wherever a name changes.
Those were 88 three-layer thermoformed signs in department colors, with raised text and Grade 2 braille, supplied through our partner manufacturers. Our own ADA signs are acrylic with raised text and automated Grade 2 braille. Either way, the rules are the same:
- Raised, uppercase, sans-serif characters, 5/8 inch to 2 inches tall, with Grade 2 braille.
- Tactile characters 48 to 60 inches above the finished floor, measured to the baseline.
- On the latch side of the door, with an 18-by-18-inch clear floor space centered on the tactile characters, beyond the door swing.
The full rules are in our Minnesota ADA signage guide.
Site and traffic signs, and window films
Stations need MUTCD traffic and parking signs on posts. Burnsville's went on galvanized posts. Frosted window films were part of the same package.
The dedication plaque
The plaque is often the last item, and the one with a date that can't move: the ribbon cutting. Burnsville's cast bronze plaque, supplied through our partners, was ordered against that date and made the January ceremony. Order it early. Cast metal prices can move between bid and order.
What a water treatment plant needs
Room identification, mapped to the room schedule
At a plant, most of the package is interior identification. At Brandon, that meant six sign types: room, small-room, stairwell, stair, stair-level and exit, across two buildings and several levels. There were more than 60 signs, from Chlorine Room to Residuals Dewatering to RO Pretreatment.
We built them in single-color subsurface-painted acrylic with raised copy and Grade 2 braille. Each was sized per the spec and mapped to a door number on the plant's room schedule. The room schedule is the backbone of the submittal. If a room is renamed in the drawings, the sign schedule has to follow.
Stair and exit signs
Under the International Building Code, exit stairs connecting more than three stories need a stair identification sign at each floor landing, and each landing door from an interior exit stair needs a tactile floor-level sign. Exit doors need tactile EXIT signs. These are easy to miss on a plant where the stairs are service stairs, so list them by stair and by level.
Hazard and safety signs
Chemical rooms carry hazard placards and safety signs. Ask early whether they're in the signage section or carried elsewhere in the specs, and assign them by name, so they don't fall between the sign maker, the process contractor and the owner.
The dedication plaque and the city's brand
Brandon's 24-by-30-inch cast-aluminum plaque, supplied through our partners, carries brushed raised copy on a stippled black field. The city's logo wasn't in the contract set. Instead of approximating it, we raised an RFI to get the City of Brandon's water-drop mark as production-ready vector art, and pinned its blue to a single named paint formula, Sherwin-Williams SW6966 "Blueblood". A city's brand should read the same in cast metal as it does on screen.
How to get the submittals approved the first time
1. Map every sign to the room schedule. At Brandon, the submittal included the plant's room-sign schedule with every sign tied to a door number.
2. Expect several rounds. Brandon's drawings went from submittal SD058 to a revised SD058-01 and a marked-up schedule before approval. Burnsville took four numbered rounds over five months.
3. Send physical samples. Burnsville's review included samples across 24 sign types. A sample settles color and finish questions faster than a drawing.
4. Use RFIs for missing information. If the logo, a color or a room name isn't in the documents, ask. Don't guess.
5. Plan for no site visit. Brandon was more than two hundred miles away, across a state line, and we never set foot on site. The first submittal went in October 2022, and the plaque was dedicated in January 2025. Accuracy on paper had to equal accuracy in the field.
6. Keep the sign maker after opening. Departments add rooms. In 2024, the Burnsville fire department came back to order additions directly, matched to the original system.
Fire station and plant signage checklist
| Component | Fire station | Water treatment plant |
|---|---|---|
| Exterior identification | Station and department letters, city or department logo | Plant name, where it's in the scope |
| Address and site | Address numbers, site monument, traffic and parking signs | As specified |
| Room signs | ADA family split by public and crew rooms | ADA room IDs mapped to the plant schedule |
| Stairs and exits | Stair, level and tactile exit signs | Stair, stair-level and exit signs across levels |
| Safety | Life-safety and egress signs | Hazard placards and safety signs: confirm who carries them |
| Films and extras | Frosted window films | As specified |
| Dedication | Cast plaque, timed to the ribbon cutting | Cast plaque in the city's brand colors |
| Process | Approved-manufacturer list, rounds of submittals, samples | Engineer's review, RFIs, room schedule |
Planning a station or plant?
Our government and civic signage page covers how we take on public work, from the bid pack to closeout. Or send us the spec section and drawings: a fabricator will reply within one business day, with a sign-by-sign scope and quote in 24–48 hours.